There are very few reasons why plastic mold maintenance actually comes from the mold itself. Although it is a small probability, we also need to pay attention to the root cause of mold maintenance from the source. 1. Str...
When the plastic mold is processed, the plastic is brought into the mold except by heat radiation and heat flow out of the mold. Most of the heat is carried out of the mold by the circulating heat transfer medium through...
When the plastic solidifies in the mold cavity to form a plastic part, we must open the cavity in order to take out the product smoothly, that is, the mold must be divided into parts. That is, the fixed mold and the mova...
In the processing of injection molds, in order to improve the accuracy of the parts, it is necessary to cut the injection molds. What are the cutting technologies related to injection molds? 1. Micro wire cutting technol...
First of all, we all know that flashing can also be called flashing and flashing, which usually occurs when the front and back molds are opened and closed. For example, the parting surface of the injection mold, the gap ...
1. High corrosion resistance Many resins and additives have a corrosive effect on the surface of the cavity. This corrosion causes the metal on the surface of the cavity to be corroded and peeled off, the surface conditi...
Add: No.9 Hengtai Road, Tinghu Economic Development Zone, Yancheng City, Jiangsu, China
Tel: 0086-515-89806501
Fax: 0086-515-89806502
E-mail: [email protected]