(1) Straight gate Straight gates are also known as center gates. The gate resistance is small and the feeding speed is fast. It is often used in single-cavity molds to form large, deep plastic parts. It is suitable for a...
In today's era of rapid industrialization, plastic molds have become an indispensable part of the industrial era. So what are the surface treatments commonly used in injection molds? 1. Polishing Mainly by cutting, the s...
The mold needs to be repaired after the mold trial and before leaving the factory, so what should we pay attention to during the repair process? 1. Check whether there is wear between the guide post and guide bush after ...
When the injection mold is ordered to start processing to T0 mold trial proofing, many processes need to be carried out, such as heat treatment, CNC machine processing, etc., then there will inevitably be more or less de...
An injection mold is a tool for producing plastic parts. Injection molds are also the backbone of the current industrial age. It is an indispensable process in the industrial age. However, there are also many failures in...
At present, the domestic plastic mold manufacturer Zheng is constantly on the rise. From the very beginning of the technical transformation, the investment was large and the starting point was high. Now it has to gradual...
Add: No.9 Hengtai Road, Tinghu Economic Development Zone, Yancheng City, Jiangsu, China
Tel: 0086-515-89806501
Fax: 0086-515-89806502
E-mail: [email protected]