1) The cooling water channel should be as much as possi […]
1) The cooling water channel should be as much as possible, and the section size should be as large as possible.
2) The distance between the cooling water channel and the surface of the injection mold cavity should be appropriate.
3) Cooling waterways should prevent blockage
4) The cooling water channel should avoid the parts where the plastic parts are prone to weld lines.
Add: No.9 Hengtai Road, Tinghu Economic Development Zone, Yancheng City, Jiangsu, China
Tel: 0086-515-89806501
Fax: 0086-515-89806502
E-mail: [email protected]