In the process of mold processing and customization, a […]
In the process of mold processing and customization, a series of situations may occur. In fact, one of the phenomena we will face is the bending deformation of injection mold processing. Then, in the entire processing process, in addition to considering the final requirements or installation, the performance of the tooling and equipment must also be considered. In this case, it is necessary to consider more injection mold processing procedures, so why is the bending during mold processing? What's the situation?
In the process of tooling customization, basically, if this happens, it may be due to improper position or insufficient number of doors, or uneven position of the top product.
When the more technical aspects of the elements, such as taking into account the particularly high temperature in the longitudinal line, or the particularly high injection pressure in the mold processing customization will be considered, there are other injections in this case as well, relative Long holding time and short cooling time. Good manufacturers basically bring us more protection in the process of processing. From the current situation, if we really want to perform custom processing, then we must consider additional processing issues. To a certain extent, these actual processing processes take into account this situation with more powerful processing systems and processing equipment, so it can continue to be applicable.
3. raw materials
When all raw materials are actually processed, they will affect some of the final cleanliness, which will lead to the deformation of the entire product. Because when the raw materials are reworked, if they are not clean enough, or the cleanliness is different in the mold processing and customization process, there will be certain errors in the processing process. Even if the product is small, it will have a series of effects on the original processing, so it is very important However, the cleanliness of raw materials is very important for the follow-up of the entire processing. This must be paid attention to, because often these small errors will determine the ultimate success or failure of the entire mold processing.
4. product design
Each product has its own design style when designing molds, such as different molds, because they have different requirements during processing, so their product design requirements are different, but different product designs are due to processing requirements Different, so the thickness of the product processing or the overall local design will be different, so it is more reasonable to highlight the thickness change, so in this case, the structure of the product should be considered.
In the process of customizing the mold, considering the existing conditions, if it is to be processed, it can be divided into various plastics to be processed, because different mold processing times are required for different materials in order to protect the final processing. The result is not the same. Of course, once the custom mold processing time is completely deformed, it is necessary to organize it for the first time, reduce it to a reasonable size, and then finally deal with it, reducing the possibility of thermal decomposition.