⒈Plasticizing pressure: (back pressure) When using a screw injection machine, the pressure on the top of the screw when the screw rotates and retreats is called plasticizing pressure, also known as back pressure. The siz...
According to the different use environment, choose pallets of different materials. Temperature conditions. Different operating temperatures directly affect the choice of tray manufacturing materials. This is because tray...
Mold polishing is to use appropriate polishing tools (such as sandpaper, polishing paste, oil stone, polishing machine or other mechanical polishing tools) to reprocess the surface of the mold cavity that has been proces...
Automobiles are increasingly demanding the production of plastic parts. The acceleration of automobile development and the continuous reduction of costs have forced automobile plastic parts manufacturers to continuously ...
Precautions for rust prevention 1: Avoid placing the mold in the wet ring. The ancients said it was good. The same is true for the mold if it is placed in a damp place for a long time, no matter how good the rust inhibit...
1. The mold design must consider the control of the mold temperature of the mold product; when the designed mold has a small injection weight but a large mold size, the heat transfer in the mold structure is very importa...
Add: No.9 Hengtai Road, Tinghu Economic Development Zone, Yancheng City, Jiangsu, China
Tel: 0086-515-89806501
Fax: 0086-515-89806502
E-mail: [email protected]